Effectively removes:
- Algae
- Lichens
- Green growth (green film caused by algae)
- Concrete, asphalt, stone slabs
- Bitumen, clinker brick
- Stoneware, natural stone, terracotta
- Tiles, ceramics
- Glass, plastic, synthetics, wood
- Sheet metal, coated sheet metal
Highly concentrated, self-acting green growth remover. Removes algae, lichens and green growth
This self-acting, highly concentrated green growth remover makes your outdoor surfaces look like new again.
Note: Carry out a compatibility test before use on marble.
Important: The product may be less effective at outdoor temperatures below 5°C. We recommend applying it only
at outdoor temperatures above 10°C.
Effective green growth and algae remover for patios and garden paths
Over time, many garden paths and patios become covered in algae and green growth. Lichens on tiles or patio slabs look unsightly and make the whole area look neglected. The green growth remover works against all algae and lichen growth on patios, balconies and footpaths.
Strong concentrate for lichen and algae control on patio slabs and balcony tiles
1 litre of concentrate makes 20 litres of highly effective solution. A stronger mix is not needed for effective use.
Easy removal of algae, lichens and green growth on patios and garden paths
Before treatment, remove any moss cushions by hand, for example by sweeping them off or using a joint scraper. The product then removes algae, lichens and green growth.
Apply the diluted solution to the surfaces with a garden pump sprayer, sprayer or watering can and leave it to work for at least 24 hours. For the best result, the solution should then be rinsed off by rain.
Once the algae have died off, they can simply be removed by hand or rinsed off, depending on the surface. More stubborn deposits such as green growth and lichens can be removed with a pressure washer filled with water only.
Remove algae and green growth from roofs
dipure® Green Growth Remover can also be used to remove green growth on roofs. It cleans the gutters at the same time, as the solution runs into them when the rain rinses it off.
Contains 100g / l C12-C16 alkylbenzyldimethylammonium chloride UN 1760 CORROSIVE LIQUID, N.A.G. (Quaternary alkylammonium compound)
Keep out of reach of children. Avoid release to the environment. Wear protective gloves / protective clothing / eye protection / face protection. If on skin (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
Store in a cool, dry place.
P102 Keep out of reach of children. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P501 Dispose of contents/container to ...
| Item information | Value |
|---|---|
| ingredients: | C12-C16 alkylbenzyldimethylammonium chloride |
All reviews: