dipure® Whirlpool Disinfection & Cleaning

  • SKU: WPD
The special disinfectant and cleaning concentrate for whirlpools, jacuzzis whirlpool tubs and similar areas of application. High yield: 50 ml to 100 liters of water (0.05 to 0.1%).
Inhalt Please select a variation.
from
22,67 €
incl. 19% VAT , plus shipping costs
  • Available immediately
Description
  • Hygiene and cleanliness with only 15 minutes exposure time
  • Highly economical! Application concentration of 0.05 to 0.1%.
    • 50 ml Whirlpool disinfection are added to 100 liters of bath water.
  • For pipeline and air duct as well as wastewater disinfection
  • Plastics, acrylic glass, metal or rubber parts are not attacked
  • Effective against germs, bacteria, fungi and legionella
  • Reduces the caking of organic dirt and lime scale
Made in Germany

Whirlpool disinfection and cleaning as a highly concentrated concentrate

Special cleaner and disinfectant for whirlpools and whirlpools or whirlpools. Developed for the disinfection of pipelines, air ducts and residual water in whirlpools and whirlpools.

Whirlpool, Whirlwanne

Why regular whirlpool & whirlpool cleaning and disinfection is important

In contrast to the normal bathtub, whirlpools and whirlpools have many small pipes and lines through which water flows and in which residual water settles. In these lines, bacteria, germs and legionella accumulate through moisture. The residual water in these pipes is a breeding ground for germs.
By regular disinfection, which should be carried out at least once a week, bacterial colonies and breeding grounds for germs are eliminated.

For frequent use of the whirlpool or whirlpool tub, we recommend more regular cleaning and disinfection. Such cleanings are also recommended after a long period of non-use.

For frequent use of the whirlpool or whirlpool tub, we recommend more regular cleaning and disinfection. Such cleanings are also recommended after a long period of non-use.

Cleaning foul-smelling and clogged pipes and lines in the whirlpool

Bacteria and germs can cause foul odors in whirlpool nozzles and pipes, or even clogs by organic dirt and water lime. With a whirlpool / whirlpool disinfection, these lines and nozzles can be cleaned and kept permanently clog-free and hygienically clean by regular use.

Input:
Output:

Simple and fast application

For regular cleaning of the whirlpool or whirlpool, add approximately 50 ml of whirlpool disinfectant to the bath water after using the whirlpool or whirlpool. The nozzles should be sufficiently covered with water and turned down. Depending on the need, add the required amount of whirlpool disinfectant to the water once a week or after each bath. Start the circulation pump and air blower 3-4 times at intervals of 30 minutes for 30 seconds each. If a more intensive whirlpool cleaning is required, the total exposure time can be increased.

If you don't use it for a long time, you should double or triple the dosage at once.

Important: When using in dosing systems, always pay attention to the manufacturer's instructions.

Danger! Causes severe skin burns and serious eye damage. Very toxic to aquatic life with long lasting effects.
Danger Environmental Hazard

This product falls under the Biocidal Products Directive 98/8/EC. Use biocides safely. Always read the label and product information before use.

BAuA registration number: N-65906

Contains 175 g/l C12-C16 alkylbenzyldimethylammonium chloride

UN 1760 CORROSIVE LIQUID, N.A.G. (Quaternary alkyl ammonium compound)

Keep out of reach of children. Avoid release to the environment. Wear protective gloves / protective clothing / eye protection / face protection. If on skin (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Write the first review for this item and help others make a purchase decision!

There are no reviews yet.